Battery Technology

Current-generation hybrid electric vehicles (HEVs) run on nickel metal hydride batteries, which offer significant improvements over traditional lead-acid batteries. For example, nickel metal hydride batteries deliver twice the power output for the weight (energy density) compared to lead-acid batteries. Nickel metal hydride batteries have worked well in non-plug-in hybrids, which are designed to allow for constant discharging and recharging and are not expected to store and provide large amounts of energy. These batteries are reaching the end of their advancement potential, however, and new battery technologies are needed to improve on the current generation of HEVs.

Plug-in hybrid electric vehicles (PHEVs) and pure battery electric vehicles (BEVs) make significant additional demands on battery technology. Unlike HEVs, which maintain a relatively constant state of charge, PHEV batteries are to be depleted to a low level when they are the primary energy source for the vehicle. And BEVs are designed to run solely on battery power. The batteries used in PHEVs and BEVs must function well in a wide range of conditions; tolerate running until nearly depleted and then being fully charged; store and provide a lot of power; last a minimum of 10 years or 150,000 miles; and, ideally, be compact and lightweight.

Automakers are moving toward lithium-ion batteries for next-generation HEVs and for PHEVs and BEVs. These batteries have greater energy density and are lighter than nickel metal hydride batteries. However, the technology is still evolving, and costs are still relatively high. (See the section on Battery Evolution below).

It is also important to have a plan for recycling batteries at the end of their useful lives to minimize the material going to landfill, and to ensure that critical elements, such as rare earth metals and lithium, are recovered and reused in new batteries.

Battery Evolution

Battery technology is evolving. The following table shows how new battery technology, such as the nickel metal hydride batteries used in today’s HEVs and the lithium-ion battery technology of next-generation electrified vehicles compare to the traditional 12-volt lead-acid battery.

	Lead-Acid	Nickel Metal Hydride (Ni-MH)	Lithium-Ion (Li-ion)
First commercial use	1859	1989	1991
Current automotive use	Traditional 12-volt batteries	Battery technology developed for today’s generation of hybrid vehicles	Under development for future hybrid electric and battery electric vehicles; some manufacturers launching in limited volumes in 2010
Strengths	Long proven in automotive use	Twice the energy for the weight compared to lead-acid Proven robustness	About twice the energy content of Ni-MH and better suited to future plug-in electrified vehicle applications By taking up less space in the vehicle, provides far greater flexibility for automotive designers
Weaknesses	Heavy; its lower energy-to-weight ratio makes it unsuitable for electrified vehicle usage	High cost (four times the cost of lead-acid); limited potential for further development	Although proven in consumer electronics, this technology is still evolving for automotive applications Will remain relatively expensive until volume production is reached
Specific energy (watt hours per kilogram)	30–40	65–70	100–150
Recyclability	Excellent	Very good	Very good

Ford has been working with battery supplier partners to develop next-generation battery technologies that can improve HEV performance and stand up to the new challenges presented by BEVs and PHEVs. For example, the performance of batteries varies with weather conditions. We are conducting tests of the effects of temperatures and other conditions so we understand and can communicate to customers the impacts on expected range between recharging.

Ford is also working with researchers at the University of Michigan and the Massachusetts Institute of Technology to develop and test improved lithium-ion battery technology.

All of Ford’s electrified products, including HEVs, PHEVs and BEVs, will use lithium-ion battery cells by 2012. Lithium-ion battery packs offer a number of advantages over the nickel metal hydride batteries that power today’s hybrid vehicles. In general, they are 25 to 30 percent smaller and 50 percent lighter, making them easier to package in a vehicle, and they can be tuned to increase power to boost acceleration, or to increase energy to extend driving distance.

The Focus Electric will be powered by a lithium-ion battery system that utilizes cooled and heated liquid to regulate battery temperature, extend battery life and maximize driving range. The innovative thermal management technology helps the Focus Electric operate efficiently in a range of ambient temperatures. Thermal management of lithium-ion battery systems is critical to the success of all-electric vehicles, because extreme temperatures can affect performance, reliability, safety and durability.

Ford is also developing a comprehensive strategy to address batteries that can no longer be used in vehicles. For example, we are working with DTE Energy to develop stationary energy storage systems from vehicle batteries that have reached the end of their useful life in vehicles. For more information on this project please see the Michigan Assembly Plant case study. In addition, Ford engages with all the parties that handle end-of-life batteries, including customers, local authorities, emergency services (e.g., tow trucks), dealerships, independent workshops and garages and vehicle recyclers. Customers can recycle their batteries with local recyclers or bring them to any Ford or Lincoln dealer for no-cost recycling.

Supply Chain Issues

As the widespread electrification of automobiles moves closer to reality, a new set of concerns is emerging regarding the environmental and social impacts of extracting and processing key materials needed to make electric vehicles. There are concerns about lithium (used to make the lithium-ion batteries that are widely used in consumer electronics and will be used in BEV and PHEV vehicles) and rare earth metals (which are used in electric motors for vehicles, wind turbines and other advanced technologies).

Significantly accelerating the production of electric vehicles is likely to require the use of much greater quantities of lithium and rare earth metals. Currently, production of these resources is concentrated in a few countries, including Chile, Bolivia and China, which has led to questions about the adequacy of the supply of these resources and the potential for rising and volatile prices as demand puts pressure on existing supplies. In addition, there are concerns about geopolitical risks posed by the limited availability of these materials. Could we be trading dependence on one limited resource (petroleum) for another? Attention is also focusing on the possibility of risks such as bribery and corruption and the potential for environmental and human rights abuses. Finally, the use of water in the production of these materials needs to be considered.

We take these concerns very seriously. We have conducted and published a study of lithium availability and demand with scientists at the University of Michigan. We found that there are sufficient resources of lithium to supply a large-scale global fleet of electric vehicles through at least the year 2100. The use of water during lithium production is typically very low. We are conducting a study of rare earth element availability and demand with scientists at the Massachusetts Institute of Technology. Ford generally does not purchase raw materials such as lithium and rare earth metals directly – they are purchased by our suppliers (or their suppliers) and provided to us in parts for our vehicles. As described in the Supply Chain section of this report, our contracts with suppliers require compliance with the legal requirements of Ford’s Code of Basic Working Conditions and the adoption of a certified environmental management system (ISO 14001). We are working in our supply chain to build the capability of our suppliers to provide sound working conditions in their operations, and we assess compliance with our Code of Basic Working Conditions in target markets. We ask the suppliers we work with to take similar steps with their suppliers. We are also working cooperatively with other automakers to extend this approach through the entire automotive supply chain.

As part of our water strategy, we are evaluating the water requirements and impacts of powering vehicles with conventional fuels, biofuels and electricity. This work includes a study of the water requirements of lithium extraction and processing (which, based on our understanding of the extraction of lithium from brines in arid areas, we anticipate will be low).

We will continue to monitor and assess these issues for their potential impact on our electrification strategy and our sustainability commitments.