Sustainability 2011/12

Water

Water Consumption in the Vehicle Lifecycle

To better assess our water-related impacts, we have been working to quantify water consumption over the life of a typical light-duty vehicle in the U.S. The Georgia Institute of Technology’s Sustainable Design and Manufacturing program recently conducted a literature survey to estimate the water footprint of a typical light-duty vehicle in the U.S. The analysis included water used in material production, production of parts, vehicle assembly, vehicle use (fuel production and distribution) and vehicle disposal at end-of-life. Georgia Tech has also worked with Ford on a number of other multidisciplinary issues related to sustainable development.

The analysis found that the greatest water consumption occurs during the use phase, when consumers are driving. This is largely due to the amounts of water required for fuel production. In the supply chain, the production and processing of metals (in particular steel and aluminum) require the most water. Identifying which portions of the supply chain are most water-intensive allows us to better assess the business risk associated with using different suppliers in potentially water-stressed areas.

Estimation of water use in the lifecycle of a vehicle is a difficult task because of incomplete data sets, as well as nonstandardized definitions (e.g., for “water use” and “water consumption”) used in earlier studies. Although water use is typically metered at the factory level, water consumption (i.e., water lost through evaporation and/or incorporation into a material, part and/or product) is much harder to quantify and requires data on water discharge in addition to water input. The Georgia Tech study was based on the average vehicle composition from an older study that did not fully reflect the material composition of current vehicles. We view the latest data as preliminary, but directionally correct. We are working to gain a better understanding of water use and consumption in all aspects of the vehicle lifecycle (including alternative fuels such as biofuels and new vehicle technologies such as electric vehicles) and plan to report updated assessments in the future.

Lifecycle Water Consumption1

Stage Approximate Water Consumption (Liters) Percentage
Total 59,600 100%
Material Production2 5,600 9%
Production of Parts 900 1.5%
Assembly of Vehicle 800 1.3%
Total Use Phase 52,000 87%
End of Life 300 0.5%

Notes to Data

  1. Source: B. Bras, F. Tejada, J. Yen, J. Zullo, T. Guldberg, Quantifying the Life Cycle Water Consumption of a Passenger Vehicle, SAE Technical Paper 2012-01-0646.
  2. Indirect, upstream water consumptions were not included in the material production stage.

Water Consumption = Freshwater withdrawals that are evaporated or incorporated in products and waste.

Water Use = All water that goes into a system. Most of this typically leaves the system as wastewater.

Georgia Tech is also helping us conduct research on the water intensity of the production of biofuels and battery materials, such as lithium. And, researchers there are helping us identify the best manufacturing technologies to improve our stationary water use.